Reliable Fire Damage Restoration and Smoke Cleanup Services Queensland

1

During a fire and due to the nature of the materials within the built environment, smoke from incomplete combustion can affect structural components as a result of acidic attack on sensitive components. Moisture vapor emitted during combustion as a gas often condenses on cold surfaces, such as concrete, metal and also contents and equipment.

The smoke contamination present may be wet, greasy, dry and contains many residual contaminants as a result of the varying types of materials burning. Following an internal structure fire or an external bushfire, especially those where plastics, synthetic materials, electronics, or PVC have burned, extremely hazardous and carcinogenic chemicals are created. One chemical, in particular, dioxin, is considered by some, to be one of the most toxic chemicals known to man.

Not only is this substance extremely toxic to all life, and far more lethal than asbestos or lead, it is also known to the World Health Organization as a member of the so-called “Dirty Dozen” – a group of dangerous chemicals also referred to as persistent organic pollutants.

During combustion, smoke will push into voids and cavities under pressure, it is often unseen and can continue to cause problems long after the builder/restorer has left the site after the repair process.

This can result in residual odour issues and structural component failure which needs to be later addressed.

It is therefore vital, that the restoration process is very detailed and combines methods which often include; removal, strip out, decontamination, drying, sealing and odour control. These need to be completed in a systematic manner, in order to expose hidden contaminants and effectively restore the affected property.

2

Fire and Smoke Restoration is a specialized process; that requires a special set of skills, combining experience, knowledge of smoke behavior during combustion, the potential risk of harm to health as a result of chemical residual compounds and the built environment. Often contractors attempt to clean building components that are permanently damaged as a result of chloride or acidic attack; this in turn increases claim cost to insurers unnecessarily.

At Pircsa we can assist in making sure that the scope of works is reflective of the resultant damage at the outset.  Our managing director is one of only five independently accredited Fire and Smoke Damage Consultants in Australia.  This knowledge and experience enable us to minimize scope creep and variations as a result of inaccurate surveying and scoping. 

Frequently Asked Questions

Not necessarily, but it shouldn’t be assumed otherwise either. Smoke travels into cavities and voids under pressure during combustion, and acidic or chloride residues can cause ongoing corrosion and component failure well after the fire itself. A proper assessment – not just a visual check – is needed to determine what can be restored and what has been permanently affected.

As soon as it’s safe to access the property. Acidic smoke residues continue to attack metals, finishes and other sensitive materials the longer they’re left untreated, and odour becomes harder to fully remove over time. Early assessment and decontamination significantly improves restoration outcomes and can reduce overall claim costs.

Where the smoke damage results from an insured event, such as a house fire, odour removal is typically included as part of the restoration scope. The key is ensuring the scope of works accurately reflects the extent of smoke penetration, since under-scoping often leads to recurring odour complaints and additional claim costs later.

It depends on the material and the extent of contamination. Many contents can be successfully cleaned and deodorised, while others – particularly porous materials or those exposed to high heat – may be beyond economical restoration. Pircsa’s managing director is one of only five independently accredited Fire and Smoke Damage Consultants in Australia, which allows for an accurate, evidence-based assessment of what can and can’t be restored.

Timeframes vary significantly depending on the severity of the fire, the materials affected and the extent of smoke penetration into the structure. A straightforward smoke-only job may take days, while major structural fire damage involving strip-out, decontamination and rebuild can take weeks or months. Pircsa provides a scope of works and a realistic timeframe following the initial assessment.

Yes, potentially. Combustion of plastics, synthetics, electronics and PVC can release highly toxic and carcinogenic compounds, including dioxins, which the World Health Organization lists among its “Dirty Dozen” persistent organic pollutants. Soot and residue should be handled by trained professionals using appropriate PPE and decontamination procedures, not cleaned without the right precautions.